PRODUCT CENTER

全部
  • 全部
  • 产品管理

65Mn hot rolled steel round bars

65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.

40CrMnMo hot rolled steel round bars

40CrMnMo steel commonly used in the manufacture of heavy duty, larger cross-section of the gear shaft, gear, truck rear axle axle, shaft, eccentric shaft, connecting rod, turbine similar parts, can also be used instead of 40CrNiMo.

A105 hot rolled steel round bars

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

grade 317LMN stainless steel

Alloy 317LMN a Corrosion Resistant Austenitic Stainless Steel with a High Molybdenum and Nitrogen Content Developed for Use in Chloride Containing Environments Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L

321 SS Plates

321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C.

Cr12MoV hot rolled steel round bars

Cr12MoV steel has high hardenability, and those with a cross-section of 300 to 400 mm or less can be completely quenched. It can maintain good hardness and wear resistance at 300 ~ 400℃, its toughness is higher than Cr12 steel, and its volume change is minimal during quenching. It can be used to manufacture various molds and tools with large cross-sections, complex shapes, and withstand large impact loads. For example, punching dies with complex shapes, inserts on complex dies, steel deep drawing dies, wire drawing dies, threaded wire plate, cold extrusion dies, cold cutting scissors, circular saws, standard tools, measuring tools, etc.

3Cr2W8V hot rolled steel round bars

High temperature wear tests for 3Cr2W8V steel were performed by a pin-on-disk high temperature wear apparatus.The effects of quenching temperatures on wear resistance of 3Cr2W8V steel were studied.The compositions,images and structure of worn surfaces were analyzed using SEM,EDS and XRD.

CrWMn hot rolled steel round bars

CrWMn die steel plate is alloy tool steel, oil quenching low deformation cold working die steel.The steel wearability

Q390B-Q390D hot rolled steel round bars

GB/T1591 Q390 contains five different steel grades as Q390A,Q390B,Q390C,Q390D and Q390E.Structural steel Q390D shall be done impacting test at low temperature minus 20 degree centigrade.Normalised heat treatment suggested to be done for low alloy steel plate Q390D in heavy thickness.

304/304L Stainless Steel Coil

Thickness:0.2mm-18mm
Width:200mm,500mm,1000mm,1219mm,1500mm,2000mm,2500mm,3000mm, etc
Length:C
Products can be customized
Surface:BA,2B,NO.1,NO.4,4K,HL,8K
Standard:ASTM,AISI,JIS,GB, DIN,EN

34CrNiMo6 hot rolled steel round bars

34CrNiMo6 is a quenching and tempering steel with high strength, high toughness and good hardenability. Used for large axles, machine components, tools and high strength fasteners. The steel can be induction hardened and it is weldable under certain conditions. Through hardenability to appr. 100 mm diameter bar with oil quenching.

20CrNiMo(8620H) hot rolled steel round bars

GB 20CrNiMo Alloy steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. GB 20CrNiMo steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. 20CrNiMo alloy steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.
< 1...323334...39 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.