Categories
Contact
E-mail：
Whatsapp / Phone：
Address：
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Plain Carbon Steel
SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water. As well as being available from stock allSS400 steel plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.Our SS400 steel plate are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted and assessed by our procurement team.
Size: 50*37*5.438kg/m~400*104*71.488
Length: 6M/12M,or cut by customer’s requirements
Other kit: Anti-theft bilt,Nut,washer and so on
Technique: Cold Drawn/Cold pilfered/Cold rolled/Hot rolled/forge-Can be processed again repeatedly
Length: 6M/12M,or cut by customer’s requirements
Other kit: Anti-theft bilt,Nut,washer and so on
Technique: Cold Drawn/Cold pilfered/Cold rolled/Hot rolled/forge-Can be processed again repeatedly
Item: SS400 angle steel.
Standard: JIS G3101-2004.
Technology: hot rolled.
Type: equal & unequal.
Surface: black or galvanized.
Length: 6 m, 9 m, 12 m or per your request.
Standard: JIS G3101-2004.
Technology: hot rolled.
Type: equal & unequal.
Surface: black or galvanized.
Length: 6 m, 9 m, 12 m or per your request.
Material: Carbon Steel/Mild Steel/non-alloy and alloy steel
Grade: SS400 A36 ST37-2 ST52 S235JR S275JR S355JR Q235B Q345B
Size(Equal): 20x20mm-250x250mm
Size(unequal): 40*30mm-200*100mm
Length: 6000mm/9000mm/12000mm
Standard: GB, ASTM, JIS, DIN, BS, NF,etc.
Grade: SS400 A36 ST37-2 ST52 S235JR S275JR S355JR Q235B Q345B
Size(Equal): 20x20mm-250x250mm
Size(unequal): 40*30mm-200*100mm
Length: 6000mm/9000mm/12000mm
Standard: GB, ASTM, JIS, DIN, BS, NF,etc.
Hot Rolled steel with an H-shaped cross-section.
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.
JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate, steel sheet, steel sections, steel pipes, etc.
SS400 I beam sizes IPE80 IPE100 IPE120 IPE 140 IPE160 IPE180 IPE200
We can supply various sizes of I beam on the basis of different quality standard.
1.Material: Q235, Q345, SS400, or the euqivalent.
2.Standard: GB, ASTM, JIS, EN, DIN.
3.Treatment: hot-rolled. 4.Length:6-12m
1.Material: Q235, Q345, SS400, or the euqivalent.
2.Standard: GB, ASTM, JIS, EN, DIN.
3.Treatment: hot-rolled. 4.Length:6-12m
S235JR is a non-alloy structural steel that is widely used for manufacturing steel products.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
S275JR steel plate,S275JR grade steel is a readily weldable low carbon manganese steel with good impact resistance. This material is commonly supplied in the untreated or normalised condition. Machinability of this material is similar to that of mild steel.
Standard:S235JR/S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Standard:S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
S235J2 steel ,S235J2 steel plate is the Non-alloy structural steels. S235J2 steel’s Mechanical properties is Yield strength more than 225MPa, tensile strength 340-510MPa, Elongation is 24%. Ultrasonic Test shall be carried out according to EN10025_1.
zan_yang@steelaotong.com
Address：29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.