Categories
Contact
E-mail：
Whatsapp / Phone：
Address：
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Plate
Grades 304/L and 316/L Stainless steel is one of the most popular and versatile materials.
Seamless stainless steel pipe is used in applications where high temperature strength and superior corrosion resistance are critical.
Seamless stainless steel pipe is used in applications where high temperature strength and superior corrosion resistance are critical.
Duplex Steel 2205 Seamless Pipe
Our is a manufacturer and global distributor of duplex stainless steel pipes.
We pride ourselves on instant delivery of duplex stainless steel pipes in more than 13 countries worldwide and have had a 0% rejection rate of our products in over a decade.
We pride ourselves on instant delivery of duplex stainless steel pipes in more than 13 countries worldwide and have had a 0% rejection rate of our products in over a decade.
ASTM A790 Duplex Steel UNS S32205 Pipe Size : 1/2"NB TO 12 "NB IN.
Seamless Pipe & Tube Size : 1/2” NB – 8” NB.
Welded Pipe & Tube Size : 6” NB – 24” NB.
Seamless Pipe & Tube Size : 1/2” NB – 8” NB.
Welded Pipe & Tube Size : 6” NB – 24” NB.
201 Stainless steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304.
Austenitic stainless steel balls with higher corrosion resistance than AISI 304 balls. They show good toughness. AISI 316L has a lower carbon content (maximum 0,030%). Balls are provided in the passivated condition. Special bearings, pumps and valves, aerosol and dispenser sprayers. Utilised in the foodstuff, paper, chemical, rubber, military, textile industry. Applications in photographic devices, medical instruments, quick couplings, recirculating balls, ink cartridges, jewels.
321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C.
Thickness：0.2mm-18mm
Width：200mm，500mm，1000mm，1219mm，1500mm，2000mm，2500mm，3000mm， etc
Length：C
Products can be customized
Surface：BA，2B，NO.1，NO.4，4K，HL，8K
Standard：ASTM，AISI，JIS,GB， DIN,EN
Width：200mm，500mm，1000mm，1219mm，1500mm，2000mm，2500mm，3000mm， etc
Length：C
Products can be customized
Surface：BA，2B，NO.1，NO.4，4K，HL，8K
Standard：ASTM，AISI，JIS,GB， DIN,EN
2507 Duplex Stainless Steel Coil Hot Rolled
Thickness: 1.2mm – 10mm, etc.
Width: 600mm – 2000mm, the narrowed products pls check in strip products
Max coil weight: 40MT, etc.
Coil ID: 508mm,610mm, etc.
Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish
Width: 600mm – 2000mm, the narrowed products pls check in strip products
Max coil weight: 40MT, etc.
Coil ID: 508mm,610mm, etc.
Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill finish
Stainless Steel 321/321H Plate
321 and 321H stainless steel plate are basic austenitic materials. These grades are stabilized by the addition of Titanium. These grades are often utilized for applications in temperatures up to 1,650 ℉.
Stainless Steel 321/321H Sheets Plates
SS 321 Sheets continues to be employed for prolonged service in the 800 Degree F to 1500 Degree F (427 Degree C to 816 Degree C) temperature range. Slightly tougher than other alloys, SS 321 Plates will produce the same tough stringy chips. A preheating is not necessary for SS 321 Coils, where a heat treatment after welding is normally not usual. 321 Stainless Steel Sheets has good creep strength up to 1500 Degree F, along with good resistance to inter-granular corrosion in the as welded condition.
201 stainless steel coil has certain acid and alkali resistance with high density, polishing,
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
321 stainless is a titanium stabilized grade commonly used for service in the 1000-1600°F temperature range. For service temperatures up to about 1600°F, a stabilizing treatment at 1550-1650°F, air cool, may be used to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking.
zan_yang@steelaotong.com
Address：29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.