Categories
Contact
E-mail：
Whatsapp / Phone：
Address：
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Sections
GCr15 hot rolled steel round bars
GCr15 is a common steel which is used to produce balls and rings of bearing.GB GCr15 bearing steel is GB standard Alloy Bearing steel, It belong to the high quality high carbon, alloy chromium,manganese steel.
Q460D hot rolled steel round bars
Q460 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, Yield Strength is 460 MPa, data is tested with 16mm diameter steel bars or steel plates, tensile strength is 550-720 Mpa, test with steel bar Ø≤40mm.For Q460 steel equivalent, chemical composition and mechanical properties, please see the tables below.
T8-T10A hot rolled steel round bars
T8, T10 and T12 are carbon tool steels. They are very hard. The Brinell hardness in annealed state is more than 300.Manual saw blade is T12 material, just quenching, hardness is greater.10 and 20 are low carbon, high quality structural steel, very soft, Brinell hardness is less than 155.Therefore, the fitter saw, laborious, the saw is very easy to wear.
10# hot rolled round steel bar
10# round steel is a high-quality low-carbon carbon steel, with good plasticity and toughness, easy to be formed by cold and hot processing, good cutting performance after normalizing or cold working, excellent weldability, no temper brittleness, hardenability and hardenability difference. Manufacturing parts that require low stress and high toughness, such as car bodies, receptacles, deep-drawn vessels, tubes, gaskets, etc., can be used for cold rolling, cold stamping, cold heading, cold bending, hot rolling and #other processes. It can also be used as carburizing parts and carbonitriding parts with low core strength.
Cr12 hot rolled steel round bars
Cr12 steel is a typical alloy Tool steel, Cr12 is a chinese Cold Work Alloy Tool Steel. Its Cold work Mechanical Properties is very nice. Cr12 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC.
30CrMnSiA hot rolled steel sheet
GB T-3077 30CRMNSIA standard applies to manufacture of bearing ring steel pipe rolling elements made by high-carbon chromium bearing steel processed with hot rolled forged round, steel wire, cold rolled. Continuous casting steel is not recommended to be the material of balls.
30CrMoV9 is a steel which in general is intended for the fabrication of quenched and tempered parts, which are generally machined and subsequently nitrided.
35CrMnSiA hot rolled steel sheet
35CrMnSiA is a low-alloy ultra-high-strength steel, generally used after quenching and tempering.35CrMnSiA, is a kind of important engineering materials that used widely in modern manufacturing fields.
25Cr2MoVA hot rolled steel sheet
25Cr2MoVA alloy steel is a kind of alloy steel.25Cr2MoVA can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc
12Cr1MoV hot rolled steel sheet
12Cr1MoV round steel has higher oxidation resistance and thermal strength. The creep limit of this steel is very close to the endurance strength value, and it has high plasticity in the case of permanent tension; the steel has good manufacturability and weldability, but it needs to be preheated to 300°C before welding and stress relief after welding. deal with. It is a steel grade widely used in high-pressure, ultra-high pressure, subcritical power station boiler superheaters, headers and main steam ducts. It still has high thermal strength and oxidation resistance at 580°C, and 12Cr1MoV steel plate has a higher durable plasticity. The production process is relatively simple, and the welding performance is good, but it is more sensitive to the normalizing cooling rate. Long-term use at 580°C will produce pearlite spheroidization.
20crmo Alloy Steel Bar is widely used to manufacture pressure tube and fastener which is non-corrosive medium, nitrogen hidrogen medium and work under 250°C, such as vane, baffle, forging and rolled section in turbine and boiler, important carburing parts in common machine.
35CrMo is the specification number of alloy structural steel (alloy quenched and tempered steel), which is mainly used to manufacture important parts in various machines that bear impact, bending, and high loads
zan_yang@steelaotong.com
Address：29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.