Categories
Contact
E-mail：
Whatsapp / Phone：
Address：
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
EN Structural Steel
S235JR is a non-alloy structural steel that is widely used for manufacturing steel products.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
S275JR steel plate,S275JR grade steel is a readily weldable low carbon manganese steel with good impact resistance. This material is commonly supplied in the untreated or normalised condition. Machinability of this material is similar to that of mild steel.
Standard:S235JR/S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Standard:S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
S235J2 steel ,S235J2 steel plate is the Non-alloy structural steels. S235J2 steel’s Mechanical properties is Yield strength more than 225MPa, tensile strength 340-510MPa, Elongation is 24%. Ultrasonic Test shall be carried out according to EN10025_1.
S235JR Material Introduction EN 10025 S235JR material (1.0038 steel) is an European standard hot rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain strength and good cold bending properties.We have large quantities of S235JR in stock with thicknesses up to 200 mm.
Standard:S235J2/S235J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Standard:ASTM, bs, GB, JIS
Grade:Q275/q235/q345/ss400/A36/s235jr
Type:Equal and Unequal
Application:Building Construction
Technique:Hot Rollled
Grade:Q275/q235/q345/ss400/A36/s235jr
Type:Equal and Unequal
Application:Building Construction
Technique:Hot Rollled
S235J0 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.
Steel grade:Q235,Q345,SS400,S235JR, S345JR,St37-2,St52
Standard:JIS,GB/T11263-1998, GB/T11263-2005
Size:100*50-900*300
Application: used for machinery, procesing, structure building, automobile manufacturing, shipbuilding, electric power
Standard:JIS,GB/T11263-1998, GB/T11263-2005
Size:100*50-900*300
Application: used for machinery, procesing, structure building, automobile manufacturing, shipbuilding, electric power
S275J2 high strength structural steel plate
S275 – a structural grade steel with a minimum yield strength of 275 N/mm² which widely used in the engineering and construction industries. S275 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure it is a highly usable steel in your various projects. EN 10025-2 S275J2 High Yield Strength Structural Steel Plate
S235JR Carbon Black Mild Hot Rolled Steel Coil
Carbon steel coil is made from slabs (mainly continuous cast slabs),
which are heated and then made into strips by roughing and finishing mills.
The hot steel strip from the last finishing mill is cooled to the set temperature
by laminar flow and rolled into coils by a coiler. The cooling coils are processed
into steel sheets, flat coils, and slit strip products through different finishing lines
according to the different needs of customers.
which are heated and then made into strips by roughing and finishing mills.
The hot steel strip from the last finishing mill is cooled to the set temperature
by laminar flow and rolled into coils by a coiler. The cooling coils are processed
into steel sheets, flat coils, and slit strip products through different finishing lines
according to the different needs of customers.
zan_yang@steelaotong.com
Address：29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.