Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
65Mn hot rolled steel round bars
65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.
Key words:
65Mn hot rolled steel round bars
Classification:
Description
65Mn hot rolled steel round bars information
65Mn steel is a Chinese GB standard spring steel grade, Manganese (Mn) improves hardenability, so the strength, hardness, elasticity and hardenability are higher than that of 65# steel, but it has overheat sensitivity and temper brittleness. Water quenching tends to form cracks. The annealed state has good machinability, low cold deformation plasticity, and poor weldability.
65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.
Chemical and Mechanical
Chemical Composition
The table below lists 65Mn high carbon steel chemical composition based on heat analysis.
| Chemical Composition, % | |||||||||
| Standard | Grade | C | Si | Mn | P, ≤ | S, ≤ | Cr, ≤ | Ni, ≤ | Cu, ≤ |
| GB/T 1222 | 65Mn | 0.62-0.70 | 0.17-0.37 | 0.90-1.20 | 0.030 | 0.030 | 0.25 | 0.35 | 0.25 |
65Mn Material Properties
Density: 7.85 g/cm3
| Mechanical Properties | ||||||
| Standard | Grade | Tensile Strength, MPa, ≥ | Yield Strength, MPa, ≥ | Elongation, %, ≥ | Reduction in Area, %, ≥ | Brinell Hardness, HBW, ≤ |
| GB/T 1222 | 65Mn | 980 | 785 | 8.0 | 30 | 302 |
Notes: Bars with a diameter and side length of not more than 80 mm and flat steels with a thickness of not more than 40 mm.
Heat Treatment Specification
| Heat Treatment | ||||
| Standard | Grade | Quenching temperature, °C | Quenching medium | Tempering temperature, °C |
| GB/T 1222 | 65Mn | 830 ± 20 | Oil | 540 ± 20 |
Annealing process: Annealing temperature (860 ± 10) °C, heat preservation for 45-60min, furnace cooling to (750 ± 10) °C, heat preservation for 3-3.5h, and furnace cooling to 650-660 °C, then cooling out of the furnace or slow cooling in a heat preservation pit.
Qualification
Strength
Related Products
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.