PRODUCT CENTER

全部
  • 全部
  • 产品管理

20CrMnTi(H) hot rolled steel round bars

GB 20CrMnTi gear steel is GB standard Alloy Carburizing Gearing steel, GB 20CrMnTi properties is a chromium, manganese, titanium alloy steel specification. 20CrMnTi is equivalent with others standard bearing/Gearing steel, gearing steel

30CrMnTi hot rolled steel round bars

30CrMnTi is 20CrMnTi steel strength, high hardenability, but slightly lower impact toughness.

27SiMn hot rolled steel round bars

GB standard material 27SiMn belongs to the China, from the steel to the finished product, we have the perfect technology and many years of accumulation of experience, we can now produce products include steel coil, sheet, plate,round bar, square steel, steel wire, steel pipe, forgings, other...

60Si2Mn hot rolled steel round bars

60Si2Mn spring steel is a widely used silico-manganese spring steel with slightly higher strength, elasticity and hardenability than 55Si2Mn. GB 60SI2MN Steel is a high quality Alloy Spring Steel, It belong to the high quality high carbon alloy Spring Steel. Quenched & Tempered Hardness is 28-34 HRc. 60SI2MN steel Annealing delivery hardenss less than 250HB.

20CrMnMo hot rolled steel round bars

Carbon C: 0.17 ~ 0.23
Si Si: 1.17 ~ 1.37
Mn Mn: 0.90 ~ 1.20
Sulfur S: to allow the residual content ≤0.035
Phosphorus P: to allow the residual content ≤0.035

9SiCr hot rolled steel round bars

9 sicr steel is low alloy cutting steel, but also often make cold work mould parts, the effect is very good. It than chrome steel (Cr2 or 9 Cr2) have higher hardenability and hardenability and have high tempering stability. The steel quotations from the former Soviet union as early as 9 xc, once known as 9 crsi steel. Composition and performance with 9 xc are exactly the same.

Stainless Steel 317

317 stainless steel, also known as UNS S31700 and Grade 317, is primarily comprised of 18% to 20% chromium and 11% to 15% nickel along with trace amounts of carbon, phosphorus, sulfur, silicon and balanced with iron.

20MnCr5 hot rolled steel round bars

20MnCr5 steel is a low alloyed engineering case hardening steel for parts which require core tensile strength of 1000 – 1300 N/mm² and good wearing resistance. This steel is carburising steel used for components requiring high wear resistance surface, coupled with tough cores to resist shock loads and strength to give large service life.

18CrNiMo7-6 hot rolled steel round bars

18CrNiMo7-6 is a case hardening steel with high toughness. There are a number of variants with high cleanliness requirements. All variants possess tighter composition ranges compared to the standard. produced with the quality class IQ (isotropic quality). This ensures a very low number of elongated sulphide inclusions which will give more isotropic properties. The high oxidic cleanliness will enable the steel to meet the same high cleanliness demands as for re-melted qualities

38CrMoAl hot rolled steel round bars

38CrMoAl is a nitrided Alloy Steel with high wear resistance, high fatigue strength and high strength.It is mainly used for nitrided parts with precise dimensions after heat treatment, or various nitrided parts with low impact load and high wear resistance.

B2 hot rolled steel round bars

Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids.

16MnCr5 hot rolled steel round bars

Steel grade 16MnCr5 is used for surface hardening when grouting, nitrocarburising, nitriding and for other types of surface chemical-thermal treatment. It is used to make shafts, axles, gears, gear wheels, bolts, levers and other transport and machine-building components.
< 1...313233...39 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.