Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
PRODUCT CENTER
AISI 4140 Alloy Steel is a common chromium-molybdenum steel that usually used after quenched and tempered, with high intensity, high hardenability. The alloy 4140 plate also has high fatigue strength and good low-temperature impact toughness.
Stainless Steel 321/321H Plate
321 and 321H stainless steel plate are basic austenitic materials. These grades are stabilized by the addition of Titanium. These grades are often utilized for applications in temperatures up to 1,650 ℉.
42CrMo hot rolled steel sheet/bar
42CrMo steelbelongs to plastic mold steel in mold steel from the perspective of material classification. It has good mechanical properties and machinability, and is widely used. There are mainly two types of materials, plate and round bar. Plate is used for mold processing Production, round rods are used to machine parts directly, which has been recognized by the industry.
309 309S Hot Rolled Stainless Steel Coil
309S is a variant of 309 stainless steel with low carbon content,
which is used for occasions requiring welding. The lower carbon
content minimizes the precipitation of carbides in the heat affected
zone near the weld, which may lead to intergranular corrosion
(welding corrosion) of stainless steel in some environments.
which is used for occasions requiring welding. The lower carbon
content minimizes the precipitation of carbides in the heat affected
zone near the weld, which may lead to intergranular corrosion
(welding corrosion) of stainless steel in some environments.
Stainless Steel 321/321H Sheets Plates
SS 321 Sheets continues to be employed for prolonged service in the 800 Degree F to 1500 Degree F (427 Degree C to 816 Degree C) temperature range. Slightly tougher than other alloys, SS 321 Plates will produce the same tough stringy chips. A preheating is not necessary for SS 321 Coils, where a heat treatment after welding is normally not usual. 321 Stainless Steel Sheets has good creep strength up to 1500 Degree F, along with good resistance to inter-granular corrosion in the as welded condition.
Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum
stainless steel with corrosion resistance superior to 316L and 317L. The higher
molybdenum content, combined with an addition of nitrogen, provides the alloy
with its enhanced corrosion resistance, especially in acidic chloride containing service.
stainless steel with corrosion resistance superior to 316L and 317L. The higher
molybdenum content, combined with an addition of nitrogen, provides the alloy
with its enhanced corrosion resistance, especially in acidic chloride containing service.
430 Stainless Steel Coil Strip
430 stainless steel is a general steel with good corrosion resistance.
Its thermal conductivity is better than that of austenite, its coefficient
of thermal expansion is smaller than that of austenite, heat fatigue
resistance, addition of stabilizing element titanium, and good mechanical
properties at the weld.
Its thermal conductivity is better than that of austenite, its coefficient
of thermal expansion is smaller than that of austenite, heat fatigue
resistance, addition of stabilizing element titanium, and good mechanical
properties at the weld.
201 stainless steel coil has certain acid and alkali resistance with high density, polishing,
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
Item: ASTM A529 steel channel.
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Item: ASTM A588 steel channel.
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Length: 3 m, 6 m, or as required.
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Length: 3 m, 6 m, or as required.
ASTM A572 High Strength Steel Channel
Item: ASTM A572-50 steel channel.
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Length: 3 m, 6 m, or as required.
Surface treatment: non-treatment, galvanised or primer.
Note: special channel sizes are available on order.
Dimensions: UPN & UPE.
Web width: 80 - 200 mm.
Web thickness: 6 - 8.5 mm (UPN) & 4.5 - 5.2 mm (UPE).
Flange width: 45 - 75 mm (UPN) & 40 - 76 mm (UPE).
Flange thickness: 8 - 11.5 mm (UPN) & 7.4 - 9.0 mm (UPE).
Length: 3 m, 6 m, or as required.
Surface treatment: non-treatment, galvanised or primer.
Note: special channel sizes are available on order.
321 stainless is a titanium stabilized grade commonly used for service in the 1000-1600°F temperature range. For service temperatures up to about 1600°F, a stabilizing treatment at 1550-1650°F, air cool, may be used to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking.
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.