全部
  • 全部
  • 产品管理

ASTM A333 Gr.6 Low Temperature Seamless Steel Pipe

Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.

SECCN2 Galvanized Steel Coil

Seccn2 is a kind of non environmental protection fingerprint resistant steel plate

Stainless Steel 410

Stainless steel 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness.

ASTM A333 Seamless Low Temperature Steel Pipe

ASTM A333 is the standard specification given to all the welded as well as seamless steel,
carbon and alloy pipes which are intended to be used at places of low temperatures.
The ASTM A333 pipes are used as heat exchanger pipes and pressure vessel pipes.

SECCN2 Galvanized Steel Sheet

Seccn2 is a kind of non environmental protection fingerprint resistant steel plate

440 stainless steel sheet

Stainless steels are high-alloy steels which have high corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are divided into three types such as ferritic, austenitic, and martensitic steels. Another group of stainless steels are precipitation-hardened steels. They are a combination of martensitic and austenitic steels. Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which make 440C particularly suited to such applications as ball bearings and valve parts.

DX51D+AZ150 Aluminum Zinc Plating Steel Sheet

Aluminum zinc alloy steel plate
has good heat resistance, can withstand high temperature
of more than 300 degrees Celsius,
similar to the high temperature oxidation
resistance of aluminum plated steel plate, it is often used in
chimney tube, oven, illuminator and fluorescent lamp shade.

ASTM A335 P91 Seamless Alloy Steel Pipe

The astm a335 P91 pipe is a seamless Pipe meant for high temperature applications.
These pipes are made from ferritic Alloy-Steel.

4J36-Invar

Invar (also know as Invar 36, NILO 36, Pernifer 36 and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron.

DX51D+AZ120 Aluminum Zinc Plating Steel Coil

Aluminum zinc plating steel plate has many excellent characteristics: strong corrosion resistance, 3 times of pure galvanized sheet;
beautiful zinc flower

Stainless steel 904L

904L stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.

6061-T6 Aluminum bar

6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
< 1...757677...81 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.