Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
ASTM A333 Gr.6 Low Temperature Seamless Steel Pipe
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Key words:
ASTM A333 Gr.6 Low Temperature Seamless Steel Pipe
Classification:
Description
Product introduction
ASTM A333 Grade 6 is the Seamless and Welded Steel Pipe size for Low-Temperature Service:
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 6
Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Impact requirements:
the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.
Referenced Documents
- ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
- ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
- ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
- ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Technical data
ASTM A333 Grade 6 Chemical Compositions(%)
| Compositions | Data |
| Carbon(max.) | 0.30 |
| Manganese | 0.29-1.06 |
| Phosphorus(max.) | 0.025 |
| Sulfur(max.) | 0.025 |
| Silicon | … |
| Nickel | … |
| Chromium | … |
| Other Elements | … |
Mechanical properties for ASTM A333 Grade 6 Alloy Steel
| Properties | Data |
| Tensile strength, min, (MPa) | 415 Mpa |
| Yield strength, min, (MPa) | 240 Mpa |
| Elongation, min, (%), L/T | 30/16.5 |
Qualification
Strength
Related Products
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.