PRODUCT CENTER

全部
  • 全部
  • 产品管理

410 Stainless Steel Sheet

Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness.

S275 JR H BEAM

Hot Rolled steel with an H-shaped cross-section.
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.

430 Stainless Steel Sheet

Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application.

ST37-2 H BEAM

Hot Rolled steel with an H-shaped cross-section.
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.

hot rolled q195 steel h beam

H-beams are shaped like an H. H-beam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over its cross section.

410HT Stainless Steel Sheet

Alloy 410 HT is the basic, general purpose, heat treated version of Type 410. It is a martensitic type, used for general purpose, where corrosion is not severe. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments.

316 stainless steel H beam

316 stainless steel H beam
316 H beam Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for 316 H beam, Ss Plate Suppliers.

SM490 Steel H Beam

SM490 Steel H Beam,A wide variety of h beam steel sm490 options are available to you, You can choose from cutting, bending h beam steel sm490, as well as from q235b, ss400, and q235 h beam steel sm490, and whether h beam steel sm490 is hot rolled, or welded.

316L STAINLESS STEEL H BEAM

Technique: Hot Rolled
Application: Building /Construction/Steel Frame
Material: 201,202,301,304,321,316,316L,etc

304 stainless steel I beam

The 304L stainless steel I-beam is a chromium-nickel grade of metal. It contains 8 percent nickel and 18 percent chromium. It is a readily machinable metal that has great formability and weldability.

304 stainless steel H beam

Thickness: 0.5mm to 45mm Sch 5 10 40 80 120 160 XS & XXS
Length: 6 meter/ 6.1 meter/ customized length/
Surface Treatment: Solution Annealed and Pickled Bright Annealed Polished

Stainless Steel 410

Stainless steel 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness.

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.