PRODUCT CENTER

全部
  • 全部
  • 产品管理

SB450 JIS standard Pressure Vessel Steel Plate

SB450 boiler steel plate owned a higher yield strength and tensile strength comparing with pressure vessel steel plate SB410.Minimum yield strength of boiler steel plate SB450 shall be 245Mpa,and tensile strength of SB450 pressure vessel steel plate shall be within 450-590Mpa.Now we give the rolling chemical composition of SB450 steel plate in below table,for the thickness over 25mm,the content of carbon may be designated to be within 0.30%,and that of Mn may be within 1.00%.

JIS G3103 SB480 Room and cold temperatures Pressure Vessel Steel plate

JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers steel SB410, SB450, SB480, SB450M and SB480M.These plates are widely used in the fabrication of boilers and pressure vessels in industries such as petrochemical and manufacturing.

JIS G3103 SB450M Pressure Vessel Steel Plate

JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers steel SB410, SB450, SB480, SB450M and SB480M.These plates are widely used in the fabrication of boilers and pressure vessels in industries such as petrochemical and manufacturing.

JIS G3103 SB480M Boiler Steel Plate

JIS G3103 standard includes steel grades: SB410, SB450, SB480, SB450M and SB480M. It specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and low temperatures.

ASTM A537 steel

The ASTM A537 specification covers heat treated carbon steel plates for pressure vessel applications.

DIN Standard 10CrMo910 Pressure Vessel Steel Plate

DIN standard 10CrMo9 10 pressure vessel steel has now been superseded with the Euro Norm specification EN 10028.

06Ni9DR steel plate

06Ni9DR steel plate belongs to pressure vessel and boiler steel. It contains 9% Ni. It is mainly used for the construction of low-temperature LNG storage tank and belongs to low-temperature steel.

16Mo3 steel

16MO3 STEEL PLATE SUPPLIERS, 16MO3 PLATE SPECIFICATION, 16MO3 PLATE 16Mo3 steel plate/sheet is one mainly of Steel for boiler steels.

ASME SA553 Type I Ni-alloy steel plates for pressure vessels

SA553 Type I in the standard SA553/SA553M is a kind ofNi alloy steel plates materialused to fabric high temperature pressure vessels, the composition of Ni is 8% and 9%.

ASME SA 387 GRADE 11 Class 2 steel

As a pressure vessel grade steel for use in elevated temperature service, is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures.

ASME SA353 Ni-alloy steel plates

ASME SA353 is a kind of Ni-alloy steel plates material used to fabric high temperature pressure vessels. In order to meet the property of standard ASME SA353, SA353 steel must be done twice Normalizing + once Tempering.

ASTM A537 Class 1,2,3 Boiler and Pressure vessel steel plate

ASTM A537 standard refers to pressure vessel plates, material in heat-treated, carbon-manganese silicon steel. Based on different strength and heat treatment, it ranges to Class 1, 2 and 3. The maximum thickness under ASTM A537 Class 1 is 100 mm [4 inch], and 150 mm [6 inch] for Class 2 and Class 3.
< 1...111213...39 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.