Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Corten A steel
Corten A is a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, Corten A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias
Key words:
Corten A steel
Classification:
Description
Product introduction
Corten A Weathering Steel
ASTM Corten A steel grade is a hot rolled products of structural steels in technical delivery conditions with improved atmospheric corrosion resistance.The steel grade CortenA is according to ASTM standard which with the yield strength of 355MPa and the tensile strength of 470-630MPa.Corten-A steel was first used in buildings in 1958 because it has anti-corrosion properties. Then Corten-A especially in China and Japan was widely used for bridges, trains, cars, trucks and industrial facilities and so on.
The top layer of the material reacts with atmospheric elements to form a rust coloured protective layer which not only makes the steel virtually maintenance free but also provides a pleasing and consistent finish.
Corten A - Grades and Equivalents
The grades and equivalents of Corten A are provided in the table below.
| Corten | EN 10025-5:2004 |
| Corten A | S355 J0WP |
Technical Data
Chemical Components
| Grade | C | Si | Mn | P | S | Cu | Ni | Cr | V | N |
| Corten-A | 0.12 | 0.25-0.75 | 0.20-0.50 | 0.07-0.15 | 0.03 | 0.25-0.55 | 0.65 | 0.50-1.25 | ||
| Corten-B | 0.16 | 0.30-0.50 | 0.80-1.25 | 0.03 | 0.03 | 0.25-0.40 | 0.4 | 0.40-0.65 | 0.02-0.10 |
Corten A - Mechanical Properties
The mechanical properties of Corten A are outlined in the following table.
| Grade | Thickness (mm) Strip Products |
Plate Products | Yield Strength Rel N/mm² Minimum |
Tensile Strength Rm N/mm² Minimum |
Elongation A50 % Minimum |
| Corten A | 2 – 12 | 6 – 12 | 345 | 485 | 20 |
Corten A Steel Plate Specification :
Thickness : 0.6 mm to 100mm
Width : 750mm to 4000mm
Length : upto 12,000mm
Corten A Steel Delivery state Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP), Electroslag Remelting Technical, HIC test.
Qualification
Strength
Related Products
Pre
Next
Pre
Next
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.