Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
ASTM A515 GR.65 medium and high temperature pressure vessel plate
A515 grade 65 Pressure vessel steel plate is a kind of steel plates material used to fabric middle or high temperature pressure vessels.ASTM A515 grade 65 Pressure vessel steel plate has three levels : A515 GR 60 (415), A515 GR 65 (450), A515 GR 70 (485)
Key words:
ASTM A515 GR.65 medium and high temperature pressure vessel plate
Classification:
Description
ASTM A515 GR.65 Pressure Vessel plate Descriptions:
As the pressure vessel steel plates,ASTM A515 grade 65 steel plate is used to build boilers and pressure vessels such as petroleum, chemical industry, power plants.ASTM A515 standard specification for pressure vessel plates, carbon steel,or intermediate-and higher-temperature service ASTM A515 grade 65 plates shall be normalized.
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
Chemical Composition and Mechanical Properties:
| A515 grade 65 Chemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Mn | P | S | Si | |
| A515 grade 65 | 0.28-0.33 | 0.98 | 0.035 | 0.035 | 0.13-0.45 |
| Grade | A515 grade 65 Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A515 grade 65 | mm | Min Mpa | Mpa | Min % |
| 200 | 240 | 450-585 | 19 | |
| 50 | 23 | |||
ASTM Standard:
- A20/A20M: Specification for General Requirements for Steel Plates for pressure Vessels
- A435/A435: Ultrasonic Examination Specification for Straight-Beam of Steel Plates
- A577/A577M: For Ultrasonic Angle-Beam Examination of Steel Plates
- A578/A578M: For Straight-Beam Ultrasonic Examination of Rolles Steel Plates for Special Applications
General Requirements and Ordering Information
The plates shall confirm to ASTM A20/A20M.
- Testing and retesting methods, procedures;
- Permissible tolerances in dimensions and mass, quality;
- Repair of defects;
- Marking, loading and ordering information;
- Coils are excluded from this specifcation in case cutted to the plates form.
Material and Manufacture
The steel shall be killed and made to a coarse austenitic grain size practice.
Heat Treatment
ASTM A515 plates thickness in 50 mm [2 inch] thickness and under are normally supplied with as-rolled condition, unless it is ordered as requested.
Plates over 50 mm [2 in] in thickness shall be normalized.
Qualification
Strength
Related Products
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.