Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
ASTM A514 high strength steel plate
ASTM A514 steel plate is a steel plate material known for its high yield strength, weldability, and toughness, even at low temperatures. ASTM A514 is a low carbon quenched and tempered alloy steel that is a low-cost, high performing material for structural use and high wear machine applications. A514 steel plate meets the ASTM International standard A514. This steel plate has a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).
Key words:
ASTM A514 high strength steel plate
Classification:
Description
Product introduction
ASTM A514 Alloy Steel Plate
The A514 plate steels are a group of quenched and tempered alloys with many attractive advantages and characteristics. It has a minimum tensile strength of 100 ksi (689 MPa) and at least 110 ksi (758 MPa) ultimate. Plates from 2.5 inches to 6.0 inches have a specified tensile strength of 90 ksi (621 MPa) and 100 - 130 ksi (689 - 896 MPa) ultimate. A514 plate also provides good weldability, and toughness at low atmospheric temperatures. The ASTM A514 group is designed for a wide range of structural uses as well as machinery and equipment. However, the primary use is as a structural steel in building construction. This group of steel, which also includes A517, alloy steel combine optimum strength, toughness, corrosion resistance, impact-abrasion resistance, and long-term economy.
A514 steel plate
ASTM A514 is most commonly used as structural steel in cranes and large heavy-load machines.
Overview:
Commonly used as structural steel in cranes or large heavy-load machines, A514 offers high strength with weldable, machinable properties.
Also referred to as T-1 steel.
Quenched and tempered for increased strength.
Available in eight grades: B, S, H, Q, E, F, A and P.
Available in heavy plate thicknesses (3-inches or greater).
Suitable in lower temperatures. Charpy impact test results for specific climates available.
Available Sizes
stocks the following standard sizes, but other sizes may be available for special orders.
| GRADE | THICKNESS | WIDTH | LENGTH |
| GRADE B | 3/16" – 1 1/4" | 48" – 120" | UP TO 480" |
| GRADE S | 3/16" – 2 1/2" | 48" – 120" | UP TO 480" |
| GRADE H | 3/16" – 2" | 48" – 120" | UP TO 480" |
| GRADE Q | 3/16" – 8" | 48" – 120" | UP TO 480" |
| GRADE E | 3/16" – 6" | 48" – 120" | UP TO 480" |
| GRADE F | 3/16" – 2 1/2" | 48" – 120" | UP TO 480" |
| GRADE A | INQUIRE | INQUIRE | INQUIRE |
| GRADE P | INQUIRE | INQUIRE | INQUIRE |
MATERIAL PROPERTIES
The following material properties are ASTM specifications and will be confirmed on the Mill Test Report.
| GRADE | YIELD POINT (KSI) | TENSILE STRENGTH (KSI) | MIN. 8” ELONGATION % |
| 3/4" OR LESS THICKNESS | 100 | 110-130 | 18 |
| GREATER THAN 3/4" TO 2.5" THICKNESS | 100 | 110-130 | 18 |
| GREATER THAN 2.5" TO 6" THICKNESS | 90 | 100-130 | 16 |
Technical data
CHEMICAL COMPOSITION
The following composition properties are ASTM specifications for A514 steel grades.
| Grade B | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.70-1.00% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.15-0.25% |
| VANADIUM | 0.03-0.08% |
| TITANIUM | 0.01-0.10% |
| BORON | 0.0005-0.005% |
| Grade S | |
| CARBON | 0.11-0.21% |
| MANGANESE | 1.10-1.50% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.020% |
| SILICON | 0.15-0.45% |
| MOLYBDENUM | 0.10-0.60% |
| VANADIUM | 0.06% |
| BORON | 0.001-0.005% |
| COLUMBIUM MAX | 0.06% |
| Grade H | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| NICKEL | 0.30-0.70% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.20-0.30% |
| VANADIUM | 0.03-0.08% |
| BORON | 0.0005-0.005% |
| Grade Q | |
| CARBON | 0.14-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.15-0.35% |
| NICKEL | 1.20-1.50% |
| CHROMIUM | 1.00-1.50% |
| MOLYBDENUM | 0.40-0.60% |
| VANADIUM | 0.03-0.08% |
| Grade E | |
| CARBON | 0.12-0.20% |
| MANGANESE | 0.40-0.70% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.40% |
| CHROMIUM | 1.40-20% |
| MOLYBDENUM | 0.40-0.60% |
| TITANIUM | 0.01-0.10% |
| BORON | 0.001-0.005% |
| CARBON | 0.10-0.20% |
| MANGANESE | 0.60-1.00% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.15-0.35% |
| NICKEL | 0.70-1.00% |
| CHROMIUM | 0.40-0.65% |
| MOLYBDENUM | 0.40-0.60% |
| VANADIUM | 0.03-0.08% |
| COPPER | 0.15-0.50% |
| BORON | 0.0005-0.006% |
| Grade A | |
| CARBON | 0.15-0.21% |
| MANGANESE | 0.80-1.10% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.40-0.80% |
| CHROMIUM | 0.50-0.80% |
| MOLYBDENUM | 0.18-0.28% |
| ZIRCONIUM | 0.05-0.15% |
| BORON | 0.0025% MAX |
| Grade P | |
| CARBON | 0.12-0.21% |
| MANGANESE | 0.95-1.30% |
| PHOSPHORUS MAX | 0.030% |
| SULFUR MAX | 0.030% |
| SILICON | 0.20-0.35% |
| NICKLE | 1.20-1.50% |
| CHROMIUM | 0.85-1.20% |
| MOLYBDENUM | 0.45-0.60% |
| BORON | 0.001-0.005% MAX |
Qualification
Strength
Related Products
Next
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.