Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
ASME SA516 GR.70 Pressure vessel steel plate
ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.
Key words:
ASME SA516 GR.70 Pressure vessel steel plate
Classification:
Description
ASME SA516 GR.70 Pressure vessel steel plate Descriptions:
ASTM A516 Grade 70 Plate is also called out as ASME SA516-70. This steel plate grade is a medium carbon alloy that also contains amounts of manganese, phosphorus, sulfur, and silicon. A516 is primarily used for service in welded pressure vessels where improved notch toughness is required
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
Chemical Composition and Mechanical Properties:
| A516 Grade 70 Chemical Composition | |||||
| Grade | The Element Max (%) | ||||
| C | Si | Mn | P | S | |
| A516 grade 70 | |||||
| Thick <12.5mm | 0.27 | 0.13-0.45 | 0.79-1.30 | 0.035 | 0.035 |
| Thick12.5-50mm | 0.28 | 0.13-0.45 | 0.79-1.30 | 0.035 | 0.035 |
| Thick50-100mm | 0.30 | 0.13-0.45 | 0.79-1.30 | 0.035 | 0.035 |
| Thick100-200mm | 0.31 | 0.13-0.45 | 0.79-1.30 | 0.035 | 0.035 |
| Thick>200mm | 0.31 | 0.13-0.45 | 0.79-1.30 | 0.035 | 0.035 |
| Grade | A516 Grade 70 Mechanical Property | |||
| Thickness | Yield | Tensile | Elongation | |
| A516 grade 70 | mm | Min Mpa | Mpa | Min % |
| 6-40 | 260 | 485-620 | 21% | |
| 40-100 | 260 | 485-620 | 17% | |
Materials and Manufacture Details for A516 Plates
The steel shall be killed and shall confirm to the fine austenitic grain size requirement of SPEC A20/A20M.
Heat Treatment
Plates in thickness of 40 mm [1.5 in] or under it normally supplied in as-rolled condition. In case require normalized or stress relieved shall be informed before the order.
Plates over 40 mm [1.5 in] thickness shall be normalized.
In case notch-toughness tests are required on plates 1.5 in [40 mm] and under this thickness, the plates shall be normalized unless otherwise specified by the purchaser.
Agreed by purchaser, cooling rates faster than cooling in air are permissible for improvement of the toughness, provided the plates are subsequently tempered in 1100 to 1300℉ [595 to 705 ℃].
Qualification
Strength
Related Products
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.