Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
A302 GR.D Boiler and Pressure Vessel Steel plate
A302 Grade D steel plates standard specification for pressure vessel plates in alloy steel, manganese molybdenum and manganese-molybdenum-nickel. A302 Grade D steel plate shall be normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. If A 302 Grade D above 50mm in thickness shall be normalized.
Key words:
A302 GR.D Boiler and Pressure Vessel Steel plate
Classification:
Description
A302 GR.D Boiler and Pressure Vessel Steel plate Descriptions:
Boiler steel plate A302 Grade D is a kind of alloy steel with Manganese,Molybdenum and nickel.A302 Grade D contains a higher Nickel element in rolling than Boiler steel plate A302 Grade C.Pressure vessel steel plate owned the same value range in mechanical property as A302 Grade B and A302 Grade C,yield strength above 345 Mpa,and tensile strength within 550-690 Mpa.Gnee steel would like to offer MTC under format EN 10204 3.1 or EN 10204 3.2 with third party inspections.
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
Chemical Composition and Mechanical Properties:
| A302 Grade D Chemical Composition | |||||||
| Carbon, max | % | Manganese, max | % | Silicon, max | % | Sulfur max | % |
| 25mm or under | 0.2 | Heat Analysis | 1.15-1.50 | Heat Analysis | 0.15-0.40 | All thick | 0.035 |
| 25-50mm | 0.23 | Product Analysis | 1.07-1.62 | Product Analysis | 0.13-0.45 | ||
| over 50mm | 0.25 | ||||||
| Molybdenum max | % | Nickel max | % | Phosphorus | % | ||
| Heat Analysis | 0.45-0.60 | Heat Analysis | 0.70-1.0 | All thick | 0.035 | ||
| Product Analysis | 0.41-0.64 | Product Analysis | 0.67-1.03 | ||||
| Mechanical Property of A302 Grade D steel plate | A302 Grade D |
| Tensile strength, kis [MPa] | 80-100 [550-690] |
| Yield strength, min, kis [MPa] | 50 [345] |
| Elongation in 8 in. [200 mm], min, % | 17 |
| Elongation in 2 in. [50 mm], min, % | 20 |
Technical Requirements & Additional Services:
♦ High tension test
♦ Low temperature impacting test
♦ Normalised for thick plates over 40mm
♦ Simulated post-welded heat treatment (PWHT)
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
Qualification
Strength
Related Products
Consultation
Please leave your contact information and we will get back to you as soon as possible
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.