Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
1050 aluminum alloy is formed by adding a small amount of copper in pure aluminum.
It has excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity.
Widely used in products with low strength requirements
It has excellent forming characteristics, high corrosion resistance, good weldability and electrical conductivity.
Widely used in products with low strength requirements
SM490 Steel H Beam,A wide variety of h beam steel sm490 options are available to you, You can choose from cutting, bending h beam steel sm490, as well as from q235b, ss400, and q235 h beam steel sm490, and whether h beam steel sm490 is hot rolled, or welded.
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
DX51D GI corrugated roofing sheet
In the continuous processing machine
cold rolled steel sheet and zinc galvanized steel
sheet served as basal plate, one layer or several layers of liquid
paint are painted onto the basal plate after surface pretreatment
cold rolled steel sheet and zinc galvanized steel
sheet served as basal plate, one layer or several layers of liquid
paint are painted onto the basal plate after surface pretreatment
5754 aluminum alloy is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
Nickel grade 200 is 99.6% pure nickel, one of the toughest metals. Nickel 200′s characteristics include excellent mechanical properties, a low gas content, low vapor- pressure, magnetic properties, high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environment.
Technique: Hot Rolled
Application: Building /Construction/Steel Frame
Material: 201,202,301,304,321,316,316L,etc
Application: Building /Construction/Steel Frame
Material: 201,202,301,304,321,316,316L,etc
Hot-dip galvanizing is a process of coating steel
with a thin zinc layer, which serves as a barrier between the steel
and the environment.
The finish is applied by passing the steel through
a molten bath of zinc at a high temperature.
with a thin zinc layer, which serves as a barrier between the steel
and the environment.
The finish is applied by passing the steel through
a molten bath of zinc at a high temperature.
The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment. 2024 is a typical duralumin alloy in the aluminum-copper-magnesium system. It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.
Standard: ASTM A53/A252/A500/A501, JIS G3444, EN 10210/10219
Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.