全部
  • 全部
  • 产品管理

PPGI & PPGL Sheet Coating

The total thickness of the pre-painted galvalume steel coil is composed of the
base steel – coating -primer – top paint – protective layer thickness.
The top paint thickness is 10-25μm, and the back paint thickness is 5-20μm.
The thinner the base steel thickness, the higher the price of the ppgi steel coil,
because the processing cost becomes higher.

09CuPCrNi-A Steel

09CuPCrNi-A is a weather resistant steel created by alloying copper, chromium and nickel. 09CuPCrNi-A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias. 09CuPCrNi-A steel plate is mainly used for shipping containers, steel bridges, vessels and tanks for preventing atmospheric corrosion usage.

34CrMo4 Seamless High Pressure Gas Cylinder Pipe

34CrMo4 seamless steel pipe/steel tube is a typical Cr-Mo alloy steel grade under European standard En10297-1.
It has high strength and creep strength, and good impact tenacity at low temperature.

Cold Rolled AluZinc Galvalume Steel Coil

Hot-dip Gavalume Aluzinc Steel Coil/Sheet
Thickness:0.14-1.5mm,
width:600-1250mm,coating mass:40-275g/m2
Surface treatment methods: anti-finger print, oiled, oiled and chromated, passivated
Scopes of application: household appliance, building materials, automobile, power, communication , etc.

Q295NH Steel

Hot rolled weathering steel plate Q295NH owned the minimum yield strength at 295 Mpa and tensile strength within 430-560Mpa.Q295NH is mainly used to producing trucks,shipping containers,buildings,towers and some structural parts for preventing atmospheric corrosion usage.

2036 Aluminum foil

2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.

1070 Aluminum foil

1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.

Q460NH Steel

High tensile strength weathering steel Q460NH is mainly used for high bridges built,shipping containers and other steel constructions in bad situiations.The lowest temperature of impacting test for Q460NH can reach till minus 40 centigrade.

6061-T6 Aluminum foil

The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.

6082 Aluminum foil

6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.

7075 Aluminum foil

7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
< 1...626364...81 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.