全部
  • 全部
  • 产品管理

15CrMoR

15CrMoR is a low-alloy high-strength steel with excellent high-temperature strength, creep resistance, toughness, and weldability.

P355GH Pressure Vessel Steel Plate

P355GH is a pressure vessel steel grade as specified under the Euro Norm standard (EN10028) which has superseded British Standard and DIN standard equivalents.

15CrMo hot rolled steel sheet

15CrMo steel is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of steel is obvious and the weldability is poor.

16MnDR

16MnDR is a low-alloy high-strength steel plate with excellent low-temperature impact toughness, good weldability, and high load-bearing capacity.

Q245R

Q245R is a low-alloy high-strength steel plate with good strength, toughness, and weldability.

Q345R

Q345R is a low-alloy high-strength steel plate with good strength, toughness, pressure resistance, and weldability.

Q370R

Q370R is a high-strength low-alloy steel plate with good strength, toughness, pressure resistance, and weldability.

A514 GR.H High Temperature Pressure Vessel Steel Plate

ASME SA514 standard specification for pressure vessel plates,
carbon steel, for intermediate-and higher-temperature service
ASME SA514 grade H plates shall be normalized.

SA514 GR.J Pressure Vessel Steel Plate

ASME SA514 standard specification for pressure vessel plates,
carbon steel, for intermediate-and higher-temperature service
ASME SA514 grade H plates shall be normalized.

ASME SA514 GR.K Boiler and Pressure Vessel Steel Plate

ASME SA514 standard specification for pressure vessel plates, carbon steel,
for intermediate-and higher-temperature service ASME SA514 grade K plates
shall be normalized.

ASME SA517 GR.A High Strength Pressure Vessel Steel Plate

ASME SA517 standard specification for pressure vessel plates,
alloy steel, high-strength, quenched and tempered. The steel
shall be killed and shall conform to the fine austenitic grain size
requirement of Specification A20/A20M.

SA517 GR.B Quenched and tempered Pressure Vessel Steel Plate

ASME SA517 standard specification for pressure vessel plates,
alloy steel, high-strength, quenched and tempered. The steel
shall be killed and shall conform to the fine austenitic grain size
requirement of Specification A20/A20M.
< 1...678...81 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.