Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
The corrosion resistance, and high temperature strength of 316
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
A high strength, corrosion resistant grade, the oxide of which forms a protective coating. This grade, while similar to A242 is available in greater thicknesses. Used in many painted and unpainted applications.
Q125 Tubing is placed within the casing.
It is used to transport oil and gas from the source rock to the wellhead.
It is used to transport oil and gas from the source rock to the wellhead.
A871 Type II Grade 60 , ASTM A871 Type II Grade 60 hot rolled steel, ASTM A871 Type II Grade 60 steel plate/sheet/bar/section steel. ASTM A871 Type II Grade 60 Corten steel, A871 Type II Grade 60 Weathering steel, A871 Type II Grade 60 Weathering resistant steel, A871 Type II Grade 60 atmosphere corrosion resistance steel.
A871 Type II Grade 65 , ASTM A871 Type II Grade 65 hot rolled steel, ASTM A871 Type II Grade 65 steel plate/sheet/bar/section steel. ASTM A871 Type II Grade 65 Corten steel, A871 Type II Grade 65 Weathering steel, A871 Type II Grade 65 Weathering resistant steel, A871 Type II Grade 65 atmosphere corrosion resistance steel.
DC04 is mainly used for deep drawing and
simple metal stamping parts of daily necessities,
such as auto parts, electrical products and other
products with high ductility requirements.
simple metal stamping parts of daily necessities,
such as auto parts, electrical products and other
products with high ductility requirements.
API 5L X42 PSL2 SAW 3PE Anti-corrosion spiral welded steel pipe
API 5L X42 pipe also called L290 pipe (by ISO 3183),
named by minimum yield strength 42100 Psi or 290 Mpa.
It’s a higher grade than Grade B where API 5L has various grades up to X100,
so x42 pipe is an low-medium level, and it requires large quantities in most of pipelines for oil and gas transmissions.
named by minimum yield strength 42100 Psi or 290 Mpa.
It’s a higher grade than Grade B where API 5L has various grades up to X100,
so x42 pipe is an low-medium level, and it requires large quantities in most of pipelines for oil and gas transmissions.
1. Width: 600-1000 mm
2. Thickness: 0.135-2.0 mm
3. Hardness: T2, T2.5, T3, T4, T5, T6, T7, DR8, DR9
4. Standard: AISI, ASTM, BS, DIN, GB, JIS
5. Grade: SGCC, SGCH, SGCE, SPCG, DX51D,
6. Technique: cold rolled
7. Coil weight: about 5--12 tons
8. Coil diameter: 508-1500 mm or as per customer's request
2. Thickness: 0.135-2.0 mm
3. Hardness: T2, T2.5, T3, T4, T5, T6, T7, DR8, DR9
4. Standard: AISI, ASTM, BS, DIN, GB, JIS
5. Grade: SGCC, SGCH, SGCE, SPCG, DX51D,
6. Technique: cold rolled
7. Coil weight: about 5--12 tons
8. Coil diameter: 508-1500 mm or as per customer's request
LDX 2101 is a low-nickel, nitrogen enhanced lean duplex stainless steel developed for general-purpose use. The austenitic-ferritic (duplex) structure of the alloy is balanced to approximately equal amounts of ferrite and austenite in the solution-annealed condition.
ASTM A871 Type III Grade 60 Corten steel, A871 Type III Grade 60 steel plate/Sheet. A871 Type III Grade 60 low alloy high strength atmospheric corrosion resisting steel. A871 Type III Grade 60 , ASTM A871 Type III Grade 60 hot rolled steel, ASTM A871 Type III Grade 60 steel plate/sheet/bar/section steel. ASTM A871 Type III Grade 60 Corten steel, A871 Type III Grade 60 Weathering steel, A871 Type III Grade 60 Weathering resistant steel, A871 Type III Grade 60 atmosphere corrosion resistance steel.
Corrugation Steel Step Roofing Sheet/Color Glazed Roofing Alu-Zinc Sheet
It has been around for many years and is still popular today,
giving a more traditional look, in fact corrugated is the only
cladding that should be used in conservation areas. We offer
many different colors and finishes, and it can be cut to length
as required from 0.5m up to 11.8m
giving a more traditional look, in fact corrugated is the only
cladding that should be used in conservation areas. We offer
many different colors and finishes, and it can be cut to length
as required from 0.5m up to 11.8m
API 5CT J55 seamless casing tubing
The J55 API casing or tubing is a relatively common one in oil drilling.
Because of the low steel grade of J55, it is used for shallow oil and gas extraction.
Because of the low steel grade of J55, it is used for shallow oil and gas extraction.
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.