全部
  • 全部
  • 产品管理

1xxx Aluminum Coil/Sheet

Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.

EStE285 steel plate

EN10028 P275NL2 steel plate/sheet, under EN standard, we can regard P275NL2 steel plate/sheet for boilers and Pressure Vessels steels.EN10028 P275NL12 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.

20Cr hot rolled steel sheet

GB 20Cr alloy Steel is a high quality Quenched and Tempered Alloy Structural steel. GB 20Cr Alloy steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. GB 20Cr steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces.

TStE285 steel plate

DIN 17102 TStE285 steel plate/sheet, under DIN standard, we can regard TStE285 steel plate/sheet as fine-grain structural steels, normalised rolled steels.DIN 17102 TStE285 is mainly used as ine-grain structural steels, normalised rolled steels.

302 STAINLESS STEEL PLATE

The grade 302 stainless is a slightly higher carbon version than grade 304 alloy that is widely found in strip and wire forms. This product is a standard specification for chromium and chromium-nickel stainless steel sheet

5xxx Aluminum Coil/Sheet

Thickness:  0.15-150mm
Port of Destination:  Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.

40Cr hot rolled steel round bars

GB 40CR alloy Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality low carbon,Low alloy chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardness is 28-34 HRc. GB 40CR steel Annealing delivery hardenss less than 250HB.40CR With a lower carbon content range, So GB 40CR alloy steel have good weldability.

WStE285 Automobile structure steel plate

WStE285 structure steel plate is widely used in automobiles, springs, agricultural machinery, motorcycles, chemicals, tools, construction machinery, chains and other manufacturing industries.

DIN StE285 steel plate for Fine-grain structural steels

StE285 steel plate, under DIN 1614/2 standard StE285 steel plate, under DIN 1614/2 standard, we can regard StE285 steel plate as Fine-grain structural steels, normalised rolled steel StE285 steel plate is one mainly of Fine-grain structural steels, normalised rolled steel,StE285 steel plate is under DIN 1614/2 standard equivalent to DIN:StE285,which with a minimum impact energy of 20J at temperatures not lower than -20 degree and the tensile strength of StE285 is 370 to 510MPa

CM690 hot rolled steel round bars

CM690 grade, What's the Chemical Composition of GB CM690 GB/T 18669? Chemical Composition of CM690 Steel, CM690 steel properties, CM690 carbon Steel, GB steel plate Supplier in Japan, GB steel sheet Exporter, GB steel Price, GB Equivalent steel, GB steel supplier in China, GB steel Chinese equivalent grade, GB CM690 GB/T 18669 steel Specifications

AISI 316/316L STAINLESS STEEL

Austenitic stainless steel balls with higher corrosion resistance than AISI 304 balls. They show good toughness. AISI 316L has a lower carbon content (maximum 0,030%). Balls are provided in the passivated condition. Special bearings, pumps and valves, aerosol and dispenser sprayers. Utilised in the foodstuff, paper, chemical, rubber, military, textile industry. Applications in photographic devices, medical instruments, quick couplings, recirculating balls, ink cartridges, jewels.

50Mn-60Mn hot rolled steel round bars

50Mn round steel is used to manufacture heat-treated parts that require high wear resistance and are subjected to high loads, such as gears, gear shafts, and mandrels with a section below 80mm.
< 1...343536...81 >

zan_yang@steelaotong.com

Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City

Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.

Any Questions? Get In Touch.

We Can Recommend Suitable Products According To Your Needs.