Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Cold rolled coil, sheet
201 stainless steel coil has certain acid and alkali resistance with high density, polishing,
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
no bubbles, no pinholes and other characteristics. It is a high-quality material for the production
of various watch cases, strap and bottom covers.
321 stainless is a titanium stabilized grade commonly used for service in the 1000-1600°F temperature range. For service temperatures up to about 1600°F, a stabilizing treatment at 1550-1650°F, air cool, may be used to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking.
The corrosion resistance, and high temperature strength of 316
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
stainless steel have been greatly improved due to the addition of Mo element.
The high temperature resistance can reach 1200-1300 degrees and can be used under harsh conditions.
Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel.
It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high
amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements
include manganese, silicon, and carbon.
The remainder of the chemical composition is primarily iron.
It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high
amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements
include manganese, silicon, and carbon.
The remainder of the chemical composition is primarily iron.
316 316L Stainless Steel Sheet
Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.
US 309/309S (UNS S30900/S30908) steel
TYPES 309 AND 309S are austenitic chromium-nickel stainless steels that provide excellent corrosion resistance and heat resistance plus good strength at room and elevated temperatures. Type 309S is identical to Type 309 except for a lower carbon content that minimizes carbide precipitation and improves weldability.
Alloy 409 is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary application is automotive exhaust systems. It contains 11% chromium which is the minimum amount for the formation of the passive surface film which gives stainless steels their corrosion resistance.
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel.
316 stainless steel H beam
316 H beam Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for 316 H beam, Ss Plate Suppliers.
316 H beam Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for 316 H beam, Ss Plate Suppliers.
Technique: Hot Rolled
Application: Building /Construction/Steel Frame
Material: 201,202,301,304,321,316,316L,etc
Application: Building /Construction/Steel Frame
Material: 201,202,301,304,321,316,316L,etc
The 304L stainless steel I-beam
is a chromium-nickel grade of metal. It contains 8 percent nickel and 18 percent chromium. It is a readily machinable metal that has great formability and weldability.
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.