Categories
Contact
E-mail：
Whatsapp / Phone：
Address：
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Medium thick plate
Weldable structural carbon steel plate SM400A is under steel standard JIS G3106.For the steel plate thickness equal or below 16mm,the minimum yield strength for steel plate SM400A shall be above 245Mpa,for the thickness between 16mm and 40mm,the minimum yield strength shall be 235 Mpa,and for the thickness above 40mm,the minimum yield point of steel SM490A shall be 215 Mpa.When rolling carbon steel plate Carbon steel plate SM400A, would completely according to steel standard JIS G3106 and mill test certificate would be issued under format EN 10204 TYPE 3.1.
Q370Q is a high-strength low-alloy steel plate with excellent strength, toughness, and weldability.
Q500C Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction
Q500E Hot Rolled steel plate is mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, excavator, car loader.
Q500F steel plate
S235JR is a non-alloy structural steel that is widely used for manufacturing steel products.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
Due to its high tensile strength and other mechanical properties this it is considered as one of the best grades of industries used for manufacturing.
S275JR steel plate,S275JR grade steel is a readily weldable low carbon manganese steel with good impact resistance. This material is commonly supplied in the untreated or normalised condition. Machinability of this material is similar to that of mild steel.
Standard:S235JR/S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Standard:S275JR/S275J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Technique:Hot Rolled
S235J2 steel ,S235J2 steel plate is the Non-alloy structural steels. S235J2 steel’s Mechanical properties is Yield strength more than 225MPa, tensile strength 340-510MPa, Elongation is 24%. Ultrasonic Test shall be carried out according to EN10025_1.
S235JR Material Introduction EN 10025 S235JR material (1.0038 steel) is an European standard hot rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain strength and good cold bending properties.We have large quantities of S235JR in stock with thicknesses up to 200 mm.
Standard:S235J2/S235J0/S355J0/S355J2/A283/A516/A572/A36/SS400
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
Shape:Equal and Unequal
thickness:3-30mm
width:20-200mm
length:6m,9m,12m
Surface treatment:Black/Galvanized
zan_yang@steelaotong.com
Address：29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.