Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Stainless Steel Plate
Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Owing to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have exceptional resistance to oxidation, and great heat resistance while offering good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content, Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.
Stainless steel 310S is austenitic chromium, nickel stainless steel (.08% max carbon) with good oxidation resistance and strength at high temperatures. It resist oxidation in continuous service up to 2000ºF gave decreasing sulphur gasses are not present. It is additionally utilized for intermittent service at temperatures up to 1900°F due to it resists rescaling and has a low coefficient of expansion. This factor reduces the tendency of the steel to warp in heat service. 310s are same as 310 aside from lower carbon content to minimize carbide precipitation during welding.
Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels.
With better strength at higher temperatures, Type 422 (S42200) is an appealing alternative to Type 403. Type 422 is a hardenable martensitic stainless steel which is being widely used for high temperatures up to 1200°F. It is capable of being heat treated to various high strength levels. It is often used in aircraft and power industries who require high strength/weight ratios from room temperature to 1200°F.
Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410, it contains a minimum of 12% chromium, just sufficient enough to give corrosion resistant properties. Alloy 420 has higher carbon content than Alloy 410 which is designed to optimize strength and hardness characteristics. It has good ductility it the annealed condition but is capable of being hardened up to Rockwell hardness 50 HRC, the highest hardness of the 12% chromium grades.
Alloy 416 is a martensitic, free-machining, chromium steel alloy that is generally considered to be the first free-machining stainless steel. It has the highest machinability of any stainless steel at about 85% of that of a free-machining carbon steel. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant.
Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
This straight chromium stainless steel offers reasonable corrosion resistance and high mechanical characteristics. The 403 Series offers heat resistance and a scaling temperature of about 1300°F.
Alloy 400 (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently specified in environments ranging from mildly oxidizing through neutral, and in moderately reducing conditions. An additional application area of the material is in marine environments and other nonoxidizing chloride solutions.
Nickel grade 200 is 99.6% pure nickel, one of the toughest metals. Nickel 200′s characteristics include excellent mechanical properties, a low gas content, low vapor- pressure, magnetic properties, high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environment.
Alloy 20 (UNS N08020) is an austenitic, nickel-iron-chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. It is also stabilized with Columbium to minimize carbide precipitation during welding. Alloy 20 appears to fall between both the stainless and nickel categories as it contains characteristics of both.
Alloy 310 is an austenitic stainless steel that combines excellent high temperature properties with good ductility and weldability.
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.