Categories
Contact
E-mail:
Whatsapp / Phone:
Address:
29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Hight Strength Low Alloy Steel
StE420 structure steel plate is widely used in Automobile, construction, bridges, electricity station, ship building, boiler, and so on.
DIN17102 TStE255 Carbon and Low-alloy High-strength Steel Plate
DIN17102 TStE255 Steel Plates are used in Construction of Bridges, Highway Construction and Other Engineering construction
Din 17102 weldable normalized fine grain structural steel plate WstE420 is mainly used in Germany industry. roll steel grade WstE420 completely according to DIN 17102.When delivery of structural steel plate WstE420,our mill would issued the original mill test certificate under format EN 10204 3.1 type.In MTC,there should be main elements chemical composition,mechanical property and the result of the basic and additional test.Steel grade,dimension,mill’s logo and heat number or batch number shall be hard stamped on each steel plate.
Steel StE255 is used for special requirements according to DIN 17178 : 1986-5 for welded steel tubes and according to DIN 17179 : 1986-5 for seamless steel tubes. These steel tubes are used above all in pressure vessel construction, apparatus construction, pipe construction, as well as in general machine and equipment construction.
Steel plate St52-3 is most normal used among all kinds of low alloy steel grades.It is equal to Chinese steel grade Q345B,low alloy high strength steel plate. Low alloy steel plate St52-3 is used to manufacture the plants of factory ,the common constructure and construction machinery and equipments.The additional technical requirements for structural steel plate St52-3 shall be Ultrasonic examination,heat treatment,low temperature impacting,shot blasting and painting for prevent rusty when transport.
St37.3 steel in steel standard DIN 17100 which applies to steel sections (including wide flange beams),steel bars,wire rods,flat products such as steel strip,steel plate,steel wide flats,seamless and welded steel pipes,square and rectangular hollow sections,forgings and semi-finished products in the general structural steels which are delivered in the hot formed or normalized condition after production.Xinsteel onwed ten thousands tons carbon steel plate and coil St37-3 in our port warehouse which is ready for shipment.
Q390E high strength low alloy structural steel owned minimum tensile strength at 490 Mpa and minimum yield strength at 390 Mpa for thickness equal or belows 16 millimeters.When rolling steel plate Q390E,the impact test shall be done at minus 40 centigrade.
Din17100 Rst37-2,Rst37.2 steel is for general structural purposes.Steel plate Rst37-2 is for use in welded,riveted and screwed struatural components,it is not intended for heat treatment apart from stress-relieving heat treatment and normalizing.Now roll steel plate Rst37-2 range shall be thickness from 2-650mm,width from 1200-4000mm and length from 4000-14000mm.For the special cutting or welding pieces,Xinsteel would like to provide processing services in our plant according to the end users’s drawing.
Q390E high strength low alloy structural steel owned minimum tensile strength at 490 Mpa and minimum yield strength at 390 Mpa for thickness equal or belows 16 millimeters.When rolling steel plate Q390E,the impact test shall be done at minus 40 centigrade.
Ust 37-2 steel plate is one mainly of Carbon structural steel, Ust 37-2 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet. Material Ust 37-2 we can offer you is super heavy steel plate , and the thickness can reach as much as 600mm .
Din 17100 St37-2 is the most common steel grade in common carbon structural steel. export about 50 thousands tons St37-2 each month to middle east for making oil tanks there.When delivery these steel plate St37-2,our mill would issued original mill test certificates for each plate which including the heat number,batch number,dimension,quantity,chemical composition,mechanical property and heat treatment if required when ordered and other technical.
In steel standard JIS G3106,steel grade SM570 owned the highest yield strength above 460 Mpa,and the tensile strength within 570-720 Mpa.Low temperature impacting test shall be done under minus 5 centigrade. roll hot rolled steel plate SM570 with thickness from 6mm-300mm,width from 1500mm-4000mm,length from 5000-16000mm.After finished rolling,the original mill test certificate would be issued by mill under format EN 10204 3.1,if our customers need the third party inspections,the MTC shall be issued under EN 10204 3.2 TYPE.
zan_yang@steelaotong.com
Address:29th Floor, West Block A, Century Apartment, Gangcheng Street, Haigang District, Qinhuangdao City
Copyright © 2025 Qinhuangdao Aotong Trading Co., Ltd.